English
The device 1 adopts the rolling and stretching method. The product has high tensile strength. Uniform thickness. Equipped with gear metering pump. Improve the stability of raw material flow rate.
Two extruders are used. Main+auxiliary co extrusion. The main material is extruded by the host, the modified material is extruded by the auxiliary machine, and the material for the heat sealing layer is extruded. The produced products can be directly used for vacuum forming. It can also produce coating adhesive raw materials such as elastomers
Equipped with online trimming. Waste winding device. Avoid waste materials coming into contact with the ground. Recyclable to achieve hygiene food grade. Circular use.
Equipped with an infrared oven. Apply surface adhesive oven to auxiliary equipment.
The winding adopts dual station center winding. 360 degree bidirectional flipping. Automatic cutting.
The electrical control adopts industrial control PLC and touch screen human-machine interface. Intelligent operation of the Internet of Things.
The device structure is as follows. The S1 extruder base platform is formed by welding steel pipes, and the S2 main extruder and S3 auxiliary extruder are installed. The raw materials are separately processed through extruders. Gear metering pump S4 squeezes into mold S5 and flows vertically between the two rollers of pressure roller S6. The thickness of the sheet is controlled by the gap between the pressure rollers. After passing through S7 cooling and shaping rod. Form a sheet with regular width. The rolling rod is internally cooled by water and equipped with a mobile guide roller base. The material enters the S8 traction roller. S9.S10 oven for cutting and winding waste edges. S11 traction, enter the winding position S12. Complete winding.
